Graphite processing and processing of hard and brittle, CNC machining in the tool wear is more serious, it is generally recommended to use carbide or diamond coating tool. Graphite processing In roughing the tool can be directly on the workpiece up and down the knife, finishing to avoid the collapse angle, the occurrence of fragmentation, often using light knife fast way to deal with. In general, graphite processing in the depth of less than 0.2mm in the case of rare occurrence of broken broken, but also get better sidewall surface quality. Graphite processing and processing of dust generated when the processing is relatively large, may invade the machine tool guide screw and spindle, which requires the processing of graphite processing machine has a corresponding processing of graphite processing dust processing equipment, machine sealing is also good, because the graphite Processing toxic.

Precautions :

1. Dusting Because graphite processing is an easy-to-wear material, it is extremely important to protect the environment from graphite dust. In the purchase of graphite processing machine tools, should consider the following:

2. The machine should be sealed with a linear guide rail, ball screw should have a positive pressure air dust dust characteristics, to prevent the grinding material into the high-speed machining center of the moving parts.

3. Graphite processing All motion control electronics and motors should be protected by a sealed shield to prevent contamination of the machine control system.

4. Should be equipped with a full set of sealing protection device, graphite processing and safety lock supporting the use of a vacuum and air flow system connected. This processing system is ideal for graphite processing, glass fiber composites, ceramics, or any abrasive material.