various types glass blowing mold
are used in the high temperature furnace with temperature reached 2200 degree at vacuum environment and 3000 degree in the deoxidized and inserted gas environment.
Advantages of various types of graphite bracket for furnace :
1, uniformity of heating structure.
2, good electrical conductivity and high electrical load.
3, corrosion resistance.
4, inoxidizability.
5, high chemical purity.
6, high mechanical strength.
The advantage is energy efficient, high value and low maintenance.
We can produce anti-oxidation and long life-span graphite crucible, graphite mold and all parts of graphite heater.
| TECHNICAL SHEET:(COMMON MODELS) |
|
Technical Specification |
JSMC-3 |
JSMC-4 |
JSMC-5 |
|
Bulk Density (g/cm3) |
≥1.72 |
≥1.78 |
≥1.85 |
|
Ash Content (PPM) |
≤1000 |
≤1000 |
≤1000 |
|
Shore Hardness |
≥40 |
≥40 |
≥45 |
|
Specific Resistance (μ.Ω.m) |
≤12 |
≤12 |
≤10 |
|
Flexural Strength (Mpa) |
≥30 |
≥35 |
≥40 |
|
Compressive Strength (Mpa) |
≥50 |
≥60 |
≥70 |
|
Max. Grain Size (μm) |
≤43 |
≤43 |
≤43 |
|
Coefficient of Thermal Expansion Mm/°C |
≤4.5*10-6 |
≤4.5*10-6 |
≤4.4*10-6 |
We can supply below related graphite parts:
various kinds of heating elements, heating chamber, hearth, heating tube, bracket, joint board, graphite adjusting plate, joint part, graphite tie-in of conducting rod, graphite heater, graphite insulated chamber, graphite tray, graphite box for sintering, graphite plate, heater tube, bridge frame, connection patrs, electrode joint, insulation barrel and heat shield for heating system etc.
Contact:Chu Zhaohui
Mobile:008613939960155（WhatsApp）
Tel: 86-375-6510880 Fax: 86-375-6510880
Address:No.10,Longxing Road, Baofeng County,Henan Province,China
Skype: judy.lu518 facebook：lujing
Wechat: luyajing1991
Zip Code:467400
Eamil: jsz@jsgraphite.com
